Quick access to the technical data sheets and calculation values for our products.
If the technical data sheet does not contain the information you are looking for, please use the product links or contact our technical hotline.
| Image | Code / Name | Description | Technical data sheets (PDF) | Link to product |
|---|---|---|---|---|
|
PIG Column shoe Type I - PI - PIG |
This foot pillars are galvanized and are suitable for mounting wooden pilots to basics. |
|||
|
PIL Column shoe type IL - PIL - PIL |
This foot pillars are galvanized and are suitable for mounting wooden pilots to the ground. |
|||
|
PIS Column shoe type IS - PIS - PIS |
These beads may be used for high load, and therefore are used as the carrier for the construction of structures. |
|||
|
PISB Heavy duty post bases - PISB |
The post bases PISB are able to support characteristic downloads up to 12 tonnes. It can also take uplift thanks … |
|||
|
PISBMAXI Post Base with Stand Off - PISBMAXI |
The PISBMAXI is a heavy duty elevated post base to suit various sizes of timber and Glulam posts. |
|||
|
PISMAXI PIS MAXI - PISMAXI |
Column shoe type IS MAXI These beads are used for MAXI largest wooden supports. |
|||
|
PJIB Post Bases - PJIB |
The PJIB post bases are suitable for vertical and horizontal loads and are connected to the concrete foundation b… |
|||
|
PL-G Column shoe Type L - PL-G |
The PL column shoes are used directly in the concrete and can absorb compressive, tensile and horizontal forces. |
|||
|
POLY-GP General Purpose Resin Mortar - POLY-GP |
Chemical anchor for use in concrete and masonry. Specially formulated for light or medium duty fixing into hollo… |
|||
|
POLYGPG WINTER General Purpose Resin Winter - POLYGPG WINTER |
||||
|
PPA Elevated Post Base with 100mm Stand Off - PPA |
The PPA is for post base installations requiring a higher standoff distance.
|
|||
|
PPB Column Shoes type PB - PPB |
These column bases are suitable for installation of supports / posts that are only subjected to pressure. |
|||
|
PPD PPD column shoes U - PPD |
The column shoes U sealing PPD have been designed to facilitate assembly. The installation in concrete requires reser… |
|||
|
PPJET Garden post bases - PPJET |
PPJET are recommended for creating small structures such as garden fences. Very easy to disassembled, they are pa… |
|||
|
PPJST Garden post bases - PPJST |
PPJST are recommended for creating small structures such as garden fences. Very easy to disassembled, they are pa… |
|||
|
PPRC Adjustable Post Base - PPRC |
The PPRC allows the structure to be adjusted after it has been built. Adjust the off the ground… |
|||
|
PPS-G Column Shoes type PB - PPS-G |
These column bases are suitable for installation of supports / posts that are only subjected to pressure. |
|||
|
PU U-shaped post bases - PU |
EMBUs are used to fasten posts on an existing substrate (balcony, deck, etc.) and protect the post from rising da… |
|||
|
PUMP Dust Pump - PUMP |
The dust pump is a must have, to ensure that holes drilled into concrete are free from dust before installing threade… |
|||
|
PVD Column Shoes type VARIO - PVD |
The height and tilt adjustable PVD column bases can be used for all timber widths between 80-120 / 120-160 mm. The PV… |
|||
|
PVDB Column Shoes type VARIO - PVDB |
The height and tilt adjustable PVDB column bases can be used for all timber widths between 80-120 / 120-160 mm. The P… |
|||
|
PVI Column Shoes type VARIO (lbs) - PVI |
The PVI column bases are height adjustable and can be set in concrete. |
|||
|
PVIB Column Shoes type VARIO (lbs) - PVIB |
The PVIB support feet are height-adjustable and can be dowelled onto concrete. |
|||
|
QDBPC50E Quik Drive Connector Screw System - QDBPC50E |
The QDBPC50E attachment is designed to be used when mounting metal connectors such as angle brackets and joist hanger… |
