ABR-S

Stainless steel frame bracket (100S)

The ABR100S is reinforced bracket which responds to structural applications on a wooden support or concrete. This bracket is recommended in aggressive atmospheres.

Technical Data Sheet

CE Marking

ETA

Service class 3

Stainless steel A4

Severe

Product Details

Images

Wood to wood connection.

Timber to masonry connection

Features

Material

Steel quality:
• Stainless steel 1.4401 or 1.4404 (V4A) in accordance with EN10088.
• The types of stainless steel that we use are the corrosion resistance class III

Benefits

• High rigidity through double-sided splash back
• High load values
• Optimized nail image
• ABR-S (100): Ø12mm holes for M10 bolts
• ABR-S (100): concrete connection possible with just one bolt
• ABR-S (9015): Less Weight- thus better handling in the warehouse
• ABR-S (9015): Ø13 mm bolt holes for constructive fixings

Application

Applicatons

In Stock:
• wood, concrete, steel

Component:
• wood, suitable wooden construction

Scope

• for fixing wood to concrete

Technical Data

Dimensions

Product Dimensions

References	Product Dimensions [mm]				Joist				Holes flange B
References	A	B	C	t	Ø5	Ø12	Ø13	Ø12x32	Ø5	Ø12	Ø13
ABR100S	100	100	90	2	10	1	-	1	14	1	-

Product capacities - Beam to beam - Full nailing

References	Product capacities - Timber to timber - Full nailing
	Number of Fasteners		Characteristic capacities - Timber C24 - 2 angle brackets per connection [kN]
	Joist	Flange B	R_1.k			R_2.k = R_3.k			R_4.k= R_5.k⁽¹
	Qty	Qty	CNA4.0x35S	CNA4.0x50S	CSA5,0x40S	CNA4.0x35S	CNA4.0x50S	CSA5,0x40S	CNA4.0x50S	CSA5,0x40S
ABR100S	10	14	9.7	15.4	min (25.6 ; 25.1/kmod)	9.6	14.2	20.3	4.2	4.2

¹⁾ b = 75 mm ; e = 130 mm

Combined load:

To obtain the resistance values for a single bracket, the values in the above table should be divided by two, provided that the supported beam is locked in rotation. Please consult our ETA-06/0106 if the beam is free to rotate.

Product capacities - Timber to Concrete

References	Product capacities - Timber to Concrete
	Number of Fasteners				Characteristic capacities - Timber C24 - 2 angle brackets per connection [kN]
	Joist		Flange B		R_1.k		R_2.k = R_3.k		R_4.k = R_5.k⁽¹
	Qty	Type	Qty	Type	CNA4.0x35S	CNA4.0x50S	CNA4.0x35S	CNA4.0x50S	CNA4.0x50S
ABR100S	1	Ø10	10	CNA*	16.7	min (26.6 ; 21.6/kmod)	7.3	10.8	10.4

* Refer to Characteristic Capacity table columns for type of fasteners that can be used in Flange A. Capacities vary depending on fastener type used.

1) b = 75 mm ; e = 130 mm

Refer to the Simpson Strong-Tie anchor product range for suitable anchors. Typical anchor solutions are BOAXII, SET-XP, WA, AT-HP, depending on the concrete type, spacing and edge distances.

Combiend load :