Roof Connectors

group.catalogs.label

  •  
  •  
  •  

Materials

  •  

Environment

  •  
  •  

Certifications

  •  
Loading ...
  • Framing Anchors

    A35E

    The A35E anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way connections. • Balanced, completely reversible design allows the A35E to be used to secure a...
    • CE Marking
    View the product
  • Gaffelanker

    GAF

    Gaffelanker GAF anvendes til forankring af spær med bredde 45-50 mm på underliggende trækonstruktion. GAF kan også anvendes til fastgørelse af toplægte eller topplanke i tegltage.
    • CE Marking
    View the product
  • Gerber connector GERB

    GERB

    Gerber joints are available for the most common timber dimensions. The set of couplings consists of a right and left end portions and can be used for purlins from 80 mm width. The maximum height of th...
    • CE Marking
    View the product
  • Gerber connector GERW

    GERW

    Connectors GERW are suitable for common gripping girders. Moreover, transverse forces in the vertical direction can absorb forces in the direction of the beam, and are therefore suitable for redirecti...
    • CE Marking
    View the product
  • HE profile anchor

    HE

    HE anchors have been developed to absorb tensile forces and are arranged opposite.. The length may be made in accordance with the ETA, from ground can be 315 mm to 359 mm.  
    • CE Marking
    View the product
  • Skewable Angle

    LS

    Designed to attach timber members at irregular angles, these connectors can be bent on site from 0° to 135°. The staggered nail pattern reduces the possibility for splitting the timber and allows inst...
    • CE Marking
    View the product
  • PFE - purlin anchor

    PFE

    PFE connectors may be used for bracing the crossing beams. Similarly, the horizontal forces can be absorbed. Depending on the load can be 2 or 4 connectors for connection. Connections are 2 left and 2...
    • CE Marking
    View the product
  • Rafter connector

    PFP

    PFP is used to connect a rafter with the wall plate or a post. It thus absorbs the uplift of the trusses located perpendicular to the gables.
    • CE Marking
    View the product
  • PFU - purlin anchor

    PFU

    PFU connectors may be used for bracing the crossing beams. Similarly, the horizontal forces can be absorbed. Depending on the load can be 2 or 4 connectors for connection. Connections are 2 left and 2...
    • CE Marking
    View the product
  • Safety Fast Masonry Restraint Hanger

    SFH

    The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange.
    • CE Marking
    View the product
  • Sparrenfußverbinder (SFN / SFM / SFH / SFHM / SFHS)

    SFxx

    Diese Sparrenfußverbinder werden satzweise (rechts + links) an Binderuntergurt und Fußschwelle bzw. an Sparren und Pfetten befestigt.  
    • CE Marking
    View the product
  • truss shoe SHB

    SHB

    SHB truss shoe is used for connecting to the beam and serve for fixing the rafter with an inclination from 30 ° to 60 ° to the base plate  Truss shoe SHB is available in three standard sizes:    SHB ...
    • CE Marking
    View the product
  • Truss shoe SHH

    SHH

    Easy to install, provide safe and dimensionally stable connection between the roof and substructure SHH truss shoe is used for connection to the concrete and are used to attach rafters with an inclin...
    • CE Marking
    View the product
  • Purlin Anchor

    SPF

    The SPF can be used to connect two timbers that cross over at 90 degrees to each other and can be used with a number of timber dimensions. The SPF are handed, left and right, and are sold separately. ...
    • CE Marking
    View the product
  • Spærvinkel

    SVI

    SVI spærvinklen anvendes til samling af hovedspær og rem i hanebåndsspær på beton eller letbetondæk. Spærvinklerne kan anvendes ved større spændvidder, hvor anvendelse af vandrette tagåsankre ikke er ...
    • CE Marking
    View the product
  • UNI

    UNI

    Universal bracket
    • CE Marking
    View the product
  • Valley Truss Clip

    VTCR

    The VTCR is designed to connect valley trusses to common trusses. Structural valley connection. Single sided for new construction or retro fit. Site adjustment for pitch. Adjustable between 10 an...
    View the product
  • no_product_filter.error