Joist Hangers
Loading ...
-
BSD joist hanger
BSD
These ceiling drapes are used to connect a secondary beam to the main support or support.View the product -
BSDI joist hanger
BSDI
These ceiling drapes are used to connect a secondary beam to the main support or assistance.View the product -
Internal Flange Face Fix Hanger
BSIN
SAE and SAI ranges are heavy-duty hangers designed for applications requiring additional strength. SAE hangers have bolt holes for 12mm fasteners into the face. SAE Timber Bolted capacity to be dete...View the product -
Face Fix Hangers
BSNN
Joist hangers are used for the connection of secondary beams to main beams or posts.View the product -
Skewed 45° Hanger (right and left)
ET
The ET is used for supporting skewed timber joists from timber members. This range is tested and standardised with a 45° skew angle left or right.View the product -
Truss hangers
ETC
These hangers are used in small trusses with Fasteners a cross-section of 38 mm. They enable to make a hip by assembling hip and jack half trusses. The models differ depending on the installation type...View the product -
Joist hanger for glulam - external flanges
GBE
Joist Hangers especially developped for glulam application. It can be installed on timber or concrete support with bolts only and can be manufactured for large dimension of timber joist.View the product -
Big face fix hangers exterior flange 4 mm
GSE 4
Big face hangers external or internal flange are recommended in a number of applications. They are used to assemble a structure effectively without custom machining and thus enhance structural reliabi...View the product -
Large joist hangers with internal flange
GSI 4
The large joist hangers can be used in several situation. They allow connection without any specific work on the timber.View the product -
Joist hangers external flange
SBE
SBE is a joist hanger that provides a load bearing capacity similar to the model with 2 mm thickness. It is the first joist hanger resulting from a study carried out according to Eurocode 5 specificat...View the product -
Width Adjustable Face Fix Joist Hanger
SDE
The SDE is a two piece, width adjustable face fix hanger. The two separate components that make up the SDE system can be adjusted to suit a range of joist widths between 60mm to 160mm. Each SDE is sup...View the product -
Timber Joist Hanger Slope Adjustable
SPR
The SPR connector supports rafters from other timber members and can be sloped up or down by up to 45 degress. Slope angle can be adjusted on-site. Adjustable between 0 and 45 degree, up and down....View the product - no_product_filter.error