I-Joist Hangers

group.catalogs.label

  •  
  •  
  •  

Certifications

  •  
Loading ...
  • I-Joist Hole Support

    IHS

    The IHS is designed to strengthen I-joists when holes are required to be cut in locations not normally permitted. Allows holes to be cut 50mm from bearing point, which allows services to run close ...
    View the product
  • Backer Free I-Joist Hanger with Adjustable Skew

    ITBS

    The ITBS solves the problem of skew hangers in I-joist to I-joist connections. It can be handed left or right on site by the carpenter, removing confusion when the floor is built opposite to the drawi...
    • CE Marking
    View the product
  • Top Flange I-Joist Hanger

    ITSE

    The ITSE hanger incorporates the ‘‘Strong Grip’’ which secures the I-joist without the need for any fasteners - where no uplift is required. Value-engineered for maximum performance. The offset sea...
    • CE Marking
    View the product
  • Face Fix I-Joist Hanger

    IUSE

    The IUSE is a face fix hanger for supporting I-joists from timber members. This hanger incorporates the “Strong Grip™” which secures the I-joist without the need for any fasteners - where no uplift is...
    • CE Marking
    View the product
  • Joist Hanger for Masonry: I-Joists

    JHMI

    The JHM and JHMI range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
    • CE Marking
    View the product
  • Light Slope & Skew Adjustable Hangers

    LSSU

    With these site adjustable hangers, you can always have the right hanger available for those special rush projects. This versatile range of products attaches joists/rafters to timber supports at any s...
    • CE Marking
    View the product
  • Multiple Joist Connector

    MJC

    The multi joist connector (MJC) allows two I-joists/metal web joists to be fixed together to act as a single unit, transferring the incoming load from the loaded ply to the unloaded ply. The MJC is an...
    • CE Marking
    View the product
  • Variable Pitch Connector

    VPA

    The VPA is an engineered one-piece connector for attaching I-joist rafters to wall plates. The VPA is adjustable to slopes between 15° and 45° with a special interlock design indicating when the ma...
    • CE Marking
    View the product
  • Slotted Z-Clip

    ZS

    The ZS clip allows I-joists off-cuts or solid sawn timber to be used as noggings between joists to support floor decks or partitions. Fully interlocking top flange works on all I-joist header width...
    • CE Marking
    View the product
  • no_product_filter.error