Hold Downs

group.catalogs.label

  •  
  •  
  •  

Environment

  •  
  •  
  •  

Certifications

  •  

Others

  •  
Loading ...
  • Anchors for frame uprights

    AH

    AH anchor and its US40/50/10G washer (sold separately) are recommended for reinforcing the corners of wood-frame walls subjected to uplift forces. This connector ensures a significant absorption of te...
    • CE Marking
    View the product
  • Reinforced Angle Bracket

    AKR

    The AKR bracket is reinforced around the bend, which significantly increases the rigidity and strength of the bracket. One-piece connector. Reinforced corners provide enhanced performance. CNA na...
    • CE Marking
    View the product
  • Angle bracket

    AKR-Z

    These brackets allow optimum connection between wood and other building materials such as concrete and steel. This is an economic connection that can be used in many areas. The types AKR and AKR-L dif...
    • New
    • CE Marking
    View the product
  • AKR stainless steel bracket

    AKRS

    These brackets allow optimum connection between wood and other building materials such as concrete and steel. This is an economic connections that can be used in many areas. AKR and AKR-L will vary sc...
    • CE Marking
    View the product
  • Tension tie BETA

    BETA

    Beta connecting rods are used as coupling elements in wood concrete. Connection to the rest is done CNA nails or screws CSA. Connecting rods must be deeply embedded in the concrete and fully anchored ...
    • CE Marking
    View the product
  • Anti-rodent mesh

    GAR

    The Anti Rodent Mesh allow a good ventilation of the cladding and prevent rodent and insect from coming inside.
    • New
    View the product
  • Tension tie HD

    HD

    HD tension anchors are used for the connection of wooden components for particular design. HD tension rods are made bent in an angle of about 2-3 mm thick, galvanized perforated sheet. The horizontal ...
    • CE Marking
    View the product
  • Double tension tie HD2P

    HD2P

    The two-part tension anchors have a large number of possible combinations. A total of 46 variants of combinations. As you can see we look at the individual needs of each problem and find a suitable op...
    • CE Marking
    View the product
  • Holdown anchor

    HD3B

    HD3B is used to transfer tensile forces through the floors, to anchor purlins into masonry or concrete. The regulatory distance from the bolt to the edge of the wood is given by the height E1. Manufac...
    • CE Marking
    View the product
  • Hold Down

    HTT

    Ideal for existing or new construction, HTT Tension ties provide a high strength timber to concrete, or timber to masonry, tension connection The long vertical leg makes it possible to add the requir...
    • CE Marking
    View the product
  • Invisible connector for timber studs

    ICST

    The ICST is a product for connecting e.g. wall elements, mainly for prefabricated houses. 2 pairs have to be used as a minimum for general use.
    • CE Marking
    View the product
  • Multi-purpose holdown

    MAH

    This holdown can be used in several configuration such as acroterion but also standard concrete floor. It must always be used with the washer US50/50/8G.
    • New
    • CE Marking
    View the product
  • Two part shear connector

    SC2P

    Making a statically relevant connection on the narrow side of a square timber is not easy in terms of the edge distances to be complied with. In the case of a threshold connection, the height compensa...
    • New
    • CE Marking
    View the product
  • no_product_filter.error