Technical Data - Double tension tie HD2P

HD2P

Technical Data

Product Dimensions

Product Dimensions - HD2P - Double tension tie HD2P
product.image_with_dim.alt - HD2P - Double tension tie HD2P
References Tun / DB nr. NOB nr. Product Dimensions [mm] Holes in flange A Holes in flange B
A B C D E t Ø5 [mm] Ø6 [mm] Ø [mm] number
HDUF250G TUN160 NOB432 250 - 40 - - 2 11 - - -
HDUF400G TUN161 NOB433 400 - 60 - - 2 40 - - -
HDUS336G TUN168 NOB438 336 236 60 44 - 2 12 - - -
HDUS348-80G - - 348 248 80 79 - 2 32 - - -
HDUL380G TUN164 NOB434 380 53 55 65 315 2 20 - - -
HDUR380G TUN166 NOB436 380 53 55 65 315 2 20 - - -
HDUL465G TUN165 NOB435 465 53 55 150 315 2 20 - - -
HDUR465G TUN167 NOB437 465 53 55 150 315 2 20 - - -
HDUF40XG TUN162 - ≥250 ** - 40 - - 2 >11 - - -
HDUF60XG TUN163 - ≥250 ** - 60 - - 2 >20 - - -
HDBU163G TUN04 NOB426 65 163 40 - 50 4 - 2 13 1
HDBU220G TUN05 NOB427 65 220 54 - 55 4 - 5 18 1
HDBU379G TUN06 NOB428 65 379 40 - 114 4 - 2 18 1
HDBU379-84-16G - - 65 379 74 - 55 4 - 6 17.5 1
HDBW60G TUN09 NOB431 82 65 50 15 27 4 - 2 13.5 1
HDBW160G TUN07 NOB429 65 160 50 15 27 4 - 2 13.5 1
HDBW200G TUN08 NOB430 65 222 60 20 37 4 - 5 17.5 1
HD2P60G 1433697 42163299 400/65* 220 60/54* - 55 2/4 40 - 17.5 1
HD2PL40G 1433701 42291105 250/65* 379 40/40* - 114 2/4 11 - 17.5 1
HD2P-U379S80 - - 348/84 379 80/74 - 55 2/4 32 - 17.5 1

The products starting with HDU .. are the upper parts, starting with HDB .. are the lower parts and are to be connected with the stated number of E-Jot screws JT2-3/5,5x25.

The article HD2P60G is composed of the upper part HDUF400G and the lower part HDBU220G,

The article HD2PL40G is composed of the upper part HDUF250G  and the lower part HDBU379G.

The article HD2P-U379S80 is composed of the upper part HDUS348-90G and the lower part HDBU379-84-16G

* Dimensions for upper part / Lower part


The lower parts HDBU ... are to be used together with washers US40/50/10G, the lower parts HDBU220G and HBDU379G are used with washer US50/50/8G and the lower part HDUS348-80G is used with US71-91-15G-C

The washers and the E-JOT screws are to be ordered separately.

** Length on customer request

Capacities

Capacities - HD2P - Double tension tie HD2P
References Number of Fasteners Characteristic capacities - Timber C24 [kN] Number of Fasteners Characteristic capacities - Timber C24
Joist Flange B R1.k Bolt factor Joist Flange B R1,k Bolt Factor
Qty Qty Type Self-tapping screws CNA4.0x35 CNA4.0x40 CNA4.0x50 CNA4.0x60 Qty Qty Type Self-tapping screws
HDUF250G 11 - - - 18.3 18.9 18.9 18.9 - max. 11 - - - min. (n x Rlat.k; 17.0/kmod) -
HDUF400G 40 - - - 29.7 29.7 29.7 29.7 - max. 40 - - - min. (n x Rlat.k; 26.7/kmod) -
HDUS336G 12 - - - 21.3 21.3 21.3 21.3 - max. 12 - - - min. (21.3 ; 23.1/kmod)* -
HDUS348-80G 32 - - - 36.7 40.5 46.7 46.7 - max. 32 - - - min. (n x 0.691 x Rlat.k ; 42.0/kmod)**** -
HDUL380G 20 - - - 13.1 15.8 21 26.3 - max. 20 - - - min. (11.7 x Rlat.k; 21.4 x Rax.k)** -
HDUR380G 20 - - - 13.1 15.8 21 26.3 - max. 20 - - - min. (8.1 x Rlat.k; 21.4 x Rax.k)*** -
HDUL465G 20 - - - 13.1 15.8 21 26.3 - max. 20 - - - min. (11.7 x Rlat.k; 21.4 x Rax.k)** -
HDUR465G 20 - - - 13.1 15.8 21 26.3 - max. 20 - - - min. (8.1 x Rlat.k; 21.4 x Rax.k)*** -
HDUF40XG - - - - - - - - - - - - - min. (n x Rlat.k; 17.0/kmod) -
HDUF60XG - - - - - - - - - - - - - min. (n x Rlat.k; 26.7/kmod) -
HDBU163G - 1 M12 2 14.2 14.2 14.2 14.2 1.55 - 1 M12 2 12.8/kmod 1.55
HDBU220G - 1 M16 3 21.3 21.3 21.3 21.3 1.4 - 1 M16 3 19.2/kmod 1.4
HDBU379G - 1 M16 2 14.2 14.2 14.2 14.2 1.46 - 1 M16 2 12.8/kmod 1.46
HDBU379-84-16G - 1 M16 5 33.3 33.3 33.3 33.3 1.17 - 1 M16 5 30.0/kmod 1.17
HDBW60G - 1 M12 2 14.2 14.2 14.2 14.2 2 - 1 M12 2 12.8/kmod 2
HDBW160G - 1 M12 2 14.2 14.2 14.2 14.2 1.24 - 1 M12 2 12.8/kmod 1.24
HDBW200G - 1 M16 3 21.3 21.3 21.3 21.3 1.23 - 1 M16 3 19.2/kmod 1.23
HD2P60G 40 1 M16 3 21.3 21.3 21.3 21.3 1.4 max. 40 1 M16 3 min. (n x Rlat.k; 19.2/kmod) 1.4
HD2PL40G 11 1 M16 2 14.2 14.2 14.2 14.2 1.46 max. 11 1 M16 2 min. (n x Rlat.k; 12.8/kmod) 1.46
HD2P-U379S80 32 1 M16 5 33.3 33.3 33.3 33.3 1.17 max. 32 * 1 M16 5 min. (ntot x 0.691 x Rlat.k ; 30.0/kmod)* 1.17

The published characteristic capacity is based on instantaneous load duration and service class 2 according to EC5 (EN 1995) - kmod = 1.1. For other load duration and service class, please refer to the ETA-07/0285 to get more accurate capacities

n = nef according to EC5, Table 8.1;
Rlat.k = characteristic capacity of the CNA nail on shearing
Rax.k = characteristic capacity of the CNA nail for pulling out

* fill nail holes symetrically starting from top and bottom rows

**  full nailing , 20 CNA
*** partial nailing, 14 CNA

The small value of upper and lower part is decisive.
The anchor bolt must be detected for a tensile force of F1.d x factor bolts.

Combinations

References Vertical parts
HDUF250G HDUF400G HDUS336G HDUS348-80G HDUL380G HDUR380G HDUL465G HDUR465G HDUF40XG HDUF60XG
HDBU163G y y y - y y y y S -
HDBU220G - HD2P60G - - y y y y - S
HDBU379G HD2PL40G y y - y y y y S S
HDBU379-84-16G - - - HD2P-U379S80 - - - - - -
HDBW60G y y y - y y y y S -
HDBW160G y y y - y y y y S -
HDBW200G - y y - y y y y - S

y = The upper and lower parts are packed separately (to order)
S = Upper parts are produced according to the customer 's requirements

HD2P60G, HD2PL40G , HD2)-U379S80 = are delivered in sets or as upper and lower parts